Connecting Philips 10BDL4151T/00 to Roombelt

Philips 10BDL4151T/00 is a top class digital signage device. We recommend running Roombelt on this device for maximum security and reliability. You can configure Philips 10BDL4151T/00 to start Roombelt automatically after power outage by following the steps below. Additionally, the Roombelt dedicated app takes advantage of the side LED bars buit into this tablet so that they change color according to the meeting room availability.

Prerequisites:

1. Go to the device Settings screen and open "Signage Display".
2. Choose "Network application" and then "SICP network port".
3. Ensure that the SICP is enabled and the port is set to 5000.

Installation:

1. On your Philips device open Chrome, download the Roombelt app from https://roombelt.com/roombelt.apk and install it.
2. Go to the device Settings screen and open "Signage Display".
3. In "Signage Display" choose "General Settings" and then "Boot on source".
4. In "Boot on source" select "Custom app".
5. Go back to "Signage Display" screen and choose "Source settings"
6. In "Source settings" click "Custom app" and then "Select app". Choose "Roombelt" and click "Save".